Diamonds

DIAMOND TECHNICAL DATA

Species ----------------------- Diamond
Chemical Formula--------------------C
Birthstone ---------------------------April
Anniversary Stone---Tenth & Sixtieth
*
Mohs Scale Hardness---------#10
Durability ----------------------Excellent
*
Refractive Index---------------2.417
*
Specific Gravity---------------3.52+/-
Significance of these* data ((FAQ # 5)

DIAMOND ADDITIONAL INFORMATION

Color Although normally thought of as white, Diamonds do exist in every color of the spectrum. The color is caused by the even distribution of certain elements in the crystal structure. Nitrogen is often present in many diamonds, causing them to take on a yellow hue. Boron produces blue and Argon produces pink / red. If both Nitrogen and Boron are present a green hue results. (see table below).
Clarity Clarity of a Diamond refers to the size, number and location of any inclusions or flaws in the Diamond. (see table below).
Treatment Most Diamonds are not treated but if there are cracks or cavities in the crystal these may be filled with a glass-like substance so as to make the imperfection less obvious. Diamonds with large, black carbon inclusions may be lazer drilled to burn out the black carbon. We do not carry any Diamonds subject to these treatments. If a Diamond contains Boron or other elements that are not evenly distributed they can be irradiated to enhance the color. Any Diamonds we carry that have not been so treated are labeled as "natural" or "nat." Synthetic (FAQ # 8) Diamonds do exist but they are primarily used for industrial purposes. Cubic Zirconium and Moizanite are not synthetic Diamonds but only Immitation (FAQ # 8).
Care Diamonds are the hardest gemstones known and usually require no special care. However, Diamonds do have cleavage plains but these only require care for the points such as Marquise or Pear Shape gems. Colored Diamonds which have been irratiated should not be subjected to the high temperatures used for retipping claws as this could cause them to lose color.
Uses Diamonds are durable enough for any jewellery use.
Sources Currently most Diamonds come from the Southern part of Africa, Australia, Russia, and most recently, Canada.
Value The value of a Diamond is created by the 4 C's- Color, Clarity, Cut and Carat weight.
































COLOR GRADES
D -Completely transparant. The actual gem cannot be seen if no facet is reflecting light.
E -Almost transparant. Outline of gem is visible, the lines between facets is barely visible.
F -"Fine White". The lines between the facets are slightly visible
G -"Top White". The lines between the facets are more visible.
H -"White". The facet edges are easily visible. There is no trace of any color.
I -"Top Commercial White". Questionable whether or not there is a trace of color.
J -"Commercial White". A trace of color but so faint that the color cannot be identified.
K -A very faint color. (TLB-Top Light Brown appears colorless in a yellow gold setting)
L -A more distinct amount of color. (LB-Light Brown)
M--- Z -Progressively more intense color




















CLARITY GRADES
F "Flawless". No inclusions visible under 10 power magnification.
IF "Internally Flawless". No internal inclusions visible under 10 power magnification.
VVS1 "Very , Very Slight Inclusions". Very few and none in the heart of the stone.
VVS 2 "Very, Very Slight Inclusions". Either a few more inclusions or some in the heart of the stone.
VS1 "Very Slight Inclusions". More easily visible under 10 power magnification.
VS2 "Very Slight Inclusions". Either a few more or one in the heart of the stone.
SI1 "Slight Inclusions". None visible to the naked eye, none in the heart of the stone.
SI2 "Slight Inclusions". Either a few more but none in the heart of the stone.
I1 Inclusions, but barely visible to the naked eye.
I2 Iinclusions readily visible to the naked eye.
I3 Many or larger inclusions obvious to the naked eye.



















RETURN TO DIAMOND


 
Copyright © 2007 The Gemstone Connection. All rights reserved.